تعريف nVidia على فيدورا 12

[KING SABRI]

السلام عليكم

عندي مشكلة في تعريف كارت nVidia Corporation GeForce 8600 GT (rev a1) على فيدورا 12

تم الأستعانه بعد الله بــ

nVidia Gforce 8600 GT on Fedora 11 | KING SABRI

my-guides.net - Fedora 12 Installation and Post Installation Guide

F12,F11 & F10 Nvidia driver guides - FedoraForum.org

http://www.linuxac.org/forum/linuxac8/thread10958.html

http://www.linuxac.org/forum/linuxac8/thread11594.html

fedora + nvidia - بحث Google‏

و جميها لم تفلح فبمجرد إعادة التشغيل و تخطي الإقلاع و ظهرو الشاشة الأولى و قبل السؤال عن المستخدم و كلمة المرور ,,تعطيني شاشة سوداء تامة


قمت بحذف ملفات ال xorg أيضا و حذفت التعريفات لعل الأمر يرجع إلى الوضع الإفتراضي لكن لم تتحن الأمور و نفس الوضع ضل

ملفات اللإعدادات و اللوج لل xorg

xorg.conf

# Xorg configuration created by livna-config-display

Section "Files"
    ModulePath   "/usr/lib/xorg/modules/extensions/nvidia"
    ModulePath   "/usr/lib/xorg/modules"
EndSection

Section "ServerFlags"
    Option        "AIGLX" "on"
EndSection

Section "Device"
    Identifier  "Videocard0"
    Driver      "nvidia"
    Option        "AddARGBGLXVisuals" "True"
EndSection

Section "Extensions"
    Option        "Composite" "Enable"
EndSection

Xorg.0.log

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System:  2.6.18-164.2.1.el5 
Current Operating System: Linux KING-SABRI 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
Kernel command line: ro root=UUID=90341195-8fe4-4a67-97ba-84090f4b4621  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
Build Date: 05 November 2009  07:43:20PM
Build ID: xorg-x11-server 1.7.1-7.fc12 
Current version of pixman: 0.16.2
    Before reporting problems, check http://bodhi.fedoraproject.org/
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 20 02:35:28 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
(**) |   |-->Device "Videocard0"
(==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
(**) Option "AIGLX" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x821b0a0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 1

(--) PCI:*(0:1:0:0) 10de:0402:0000:0000 nVidia Corporation GeForce 8600 GT rev 161, Mem @ 0xe6000000/16777216, 0xc0000000/536870912, 0xe4000000/33554432, I/O @ 0x0000a000/128, BIOS @ 0x????????/131072
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/nvidia/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA:     system's kernel log for additional error messages.
(II) UnloadModule: "nvidia"
(II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) No drivers available.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
     at http://bodhi.fedoraproject.org/
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Xorg.9.log

X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System:  2.6.18-164.2.1.el5 
Current Operating System: Linux KING-SABRI 2.6.31.5-127.fc12.i686.PAE #1 SMP Sat Nov 7 21:25:57 EST 2009 i686
Kernel command line: ro root=UUID=90341195-8fe4-4a67-97ba-84090f4b4621  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
Build Date: 05 November 2009  07:43:20PM
Build ID: xorg-x11-server 1.7.1-7.fc12 
Current version of pixman: 0.16.2
    Before reporting problems, check http://bodhi.fedoraproject.org/
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.9.log", Time: Fri Nov 20 01:58:48 2009
(II) Loader magic: 0x821b0a0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 6

(--) PCI:*(0:1:0:0) 10de:0402:0000:0000 nVidia Corporation GeForce 8600 GT rev 161, Mem @ 0xe6000000/16777216, 0xc0000000/536870912, 0xe4000000/33554432, I/O @ 0x0000a000/128, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default nouveau Device 0"
        Driver    "nouveau"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default nouveau Screen 0"
        Device    "Builtin Default nouveau Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default nouveau Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default nouveau Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default nouveau Device 0"
(==) No monitor specified for screen "Builtin Default nouveau Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 0.0.10
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.99.1, module version = 2.2.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
    compiled for 1.6.99.1, module version = 0.4.1
    ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver 
(II) NOUVEAU driver for NVIDIA chipset families :
    RIVA TNT    (NV04)
    RIVA TNT2   (NV05)
    GeForce 256 (NV10)
    GeForce 2   (NV11, NV15)
    GeForce 4MX (NV17, NV18)
    GeForce 3   (NV20)
    GeForce 4Ti (NV25, NV28)
    GeForce FX  (NV3x)
    GeForce 6   (NV4x)
    GeForce 7   (G7x)
    GeForce 8   (G8x)
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 0.0.2
    ABI class: X.Org Video Driver, version 6.0
(--) NOUVEAU(0): Chipset: "NVIDIA NV84"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
(--) NOUVEAU(0): [drm] kernel modesetting in use
(II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Builtin Default nouveau Screen 0" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xC0000000
(--) NOUVEAU(0): MMIO registers at 0xE6000000
(II) NOUVEAU(0): Output DVI-I-0 has no monitor section
(II) NOUVEAU(0): Output VGA-0 has no monitor section
(II) NOUVEAU(0): EDID for output DVI-I-0
(II) NOUVEAU(0): Manufacturer: SAM  Model: 2ad  Serial#: 1212231993
(II) NOUVEAU(0): Year: 2008  Week: 15
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) NOUVEAU(0): Sync:  Separate  Composite
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41  vert.: 27
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.640 redY: 0.349   greenX: 0.284 greenY: 0.617
(II) NOUVEAU(0): blueX: 0.142 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Supported established timings:
(II) NOUVEAU(0): 720x400@70Hz
(II) NOUVEAU(0): 640x480@60Hz
(II) NOUVEAU(0): 640x480@67Hz
(II) NOUVEAU(0): 640x480@72Hz
(II) NOUVEAU(0): 640x480@75Hz
(II) NOUVEAU(0): 800x600@56Hz
(II) NOUVEAU(0): 800x600@60Hz
(II) NOUVEAU(0): 800x600@72Hz
(II) NOUVEAU(0): 800x600@75Hz
(II) NOUVEAU(0): 832x624@75Hz
(II) NOUVEAU(0): 1024x768@60Hz
(II) NOUVEAU(0): 1024x768@70Hz
(II) NOUVEAU(0): 1024x768@75Hz
(II) NOUVEAU(0): 1280x1024@75Hz
(II) NOUVEAU(0): 1152x864@75Hz
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported standard timings:
(II) NOUVEAU(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) NOUVEAU(0): #1: hsize: 1440  vsize 900  refresh: 75  vid: 3989
(II) NOUVEAU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NOUVEAU(0): #3: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) NOUVEAU(0): #4: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 106.5 MHz   Image Size:  410 x 257 mm
(II) NOUVEAU(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NOUVEAU(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
(II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NOUVEAU(0): Monitor name: SyncMaster
(II) NOUVEAU(0): Serial No: H9FQ431647
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0):     00ffffffffffff004c2dad0239314148
(II) NOUVEAU(0):     0f1201036c291b782adc55a359489e24
(II) NOUVEAU(0):     115054bfef809500950f81808140714f
(II) NOUVEAU(0):     0101010101019a29a0d0518422305098
(II) NOUVEAU(0):     36009a011100001c000000fd00384b1e
(II) NOUVEAU(0):     510e000a202020202020000000fc0053
(II) NOUVEAU(0):     796e634d61737465720a2020000000ff
(II) NOUVEAU(0):     00483946513433313634370a202000a9
(II) NOUVEAU(0): EDID vendor "SAM", prod id 685
(II) NOUVEAU(0): Using EDID range info for horizontal sync
(II) NOUVEAU(0): Using EDID range info for vertical refresh
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Printing probed modes for output DVI-I-0
(II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): Output DVI-I-0 connected
(II) NOUVEAU(0): Output VGA-0 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output DVI-I-0 using initial mode 1440x900 +0+0
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(--) NOUVEAU(0): Virtual size is 1440x900 (pitch 1440)
(**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
(II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(**) NOUVEAU(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NOUVEAU(0):  Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(**) NOUVEAU(0):  Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NOUVEAU(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) NOUVEAU(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) NOUVEAU(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NOUVEAU(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
(II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) NOUVEAU(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) NOUVEAU(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NOUVEAU(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
(II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
(II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) NOUVEAU(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) NOUVEAU(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
(II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) NOUVEAU(0): Display dimensions: (410, 270) mm
(**) NOUVEAU(0): DPI set to (89, 84)
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): Opened GPU channel 2
(II) NOUVEAU(0): [DRI2] Setup complete
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(II) NOUVEAU(0): AGPGART: 512MiB available
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) SELinux: Disabled by boolean
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed (/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
(II) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 380 x 238
resize called 1440 900
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.0, module version = 2.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Device: "/dev/input/event4"
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found absolute axes
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found x and y absolute axes
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Configuring as mouse
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Configuring as keyboard
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: (accel) acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: initialized for relative axes.
(WW) Microsoft Microsoft Wireless Optical Desktop® 2.10: ignoring absolute axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Desktop® 2.10
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: always reports core events
(**) Microsoft Microsoft Wireless Optical Desktop® 2.10: Device: "/dev/input/event3"
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Found keys
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Desktop® 2.10" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105+inet"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft Wireless Optical Desktop® 2.10: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) NOUVEAU(0): NVLeaveVT is called.
(II) NOUVEAU(0): Closed GPU channel 2

شكرا

[محمد نجم]

يبدو ان التعريف الحر مازال يعمل يا صبري ويوجد تضارب

يفضل ان تخذفه

NOUVEAU 

هذا اسمه
بعد ذلك اعد تنصيب تعريف نفيديا من المستودعات واكتب وانت روت:

nvidia-xconfig 

[alsadi]

يبدو أن kmod-nvidia لا يعمل. ثبت akmod-nvidia
كذلك تأكد من مخرجات
lsmod | grep -i nvidia

[KING SABRI]

يبدو ان التعريف الحر مازال يعمل يا صبري ويوجد تضارب

يفضل ان تخذفه

NOUVEAU 

هذا اسمه
بعد ذلك اعد تنصيب تعريف نفيديا من المستودعات واكتب وانت روت:

nvidia-xconfig 

نعم يا محمد كلامك صحيح .التعريف موجود لكني أستغرب لماذا لا يوجد إجراء ينهي هذه المشكلة كأن يتم إغلاق القديم و استخدام التعريف الجديد . أقصد بكلامي أي شئ يمنع هذه المشكلة

التعريف موجود باسم
xorg-x11-drv-nouveau-1:0.0.15.17.20091105gite1c2efd.fc12.i686

يبدو أن kmod-nvidia لا يعمل. ثبت akmod-nvidia
كذلك تأكد من مخرجات
lsmod | grep -i nvidia

لا يوجد مخرجات للأمر ياخوي و سأمسح التعريف الموجود مسبقا و أقوم بإنزال ال akmod لأني فرمت اليوم و أمس لما شبعت


====================
ملاحظة قمت بمسح التعريف الافتراضي "xorg-x11-drv-nouveau-1:0.0.15.17.20091105gite1c2efd.fc12.i686" و عملت ريستارت الدنيا كلها خربت حتى إني ما قدرت أدخل إلى سطر الأوامر في مستوى أخر


لي عوده بعد تطبيق كلامكم

[alsadi]

لا يوجد مخرجات للأمر ياخوي و سأمسح التعريف الموجود مسبقا و أقوم بإنزال ال akmod لأني فرمت اليوم و أمس لما شبعت

إن كان لا يوجد مخرجات فهذا يعني أن nvidia.ko غير موجود وهو يأتي من kmod أو akmod

تأكد من أن kernel-devel مثبتة

[KING SABRI]

[root@KING-SABRI ~]# nvidia-xconfig

Using X configuration file: "/etc/X11/xorg.conf".

WARNING: No Screen specified, constructing implicit screen section.


WARNING: No Layout specified, constructing implicit layout section using screen "Default Screen".


WARNING: Unable to find CorePointer in X configuration; attempting to add new CorePointer section.


WARNING: The CorePointer device was not specified explicitly in the layout; using the first mouse
device.


WARNING: Unable to find CoreKeyboard in X configuration; attempting to add new CoreKeyboard section.


WARNING: The CoreKeyboard device was not specified explicitly in the layout; using the first keyboard
device.

Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'

Nothing working normally with me in this Holly days

[KING SABRI]

جربت يا إخوان كل الإحتمالات

عندما أزيل التعريف القديم و أعمل ريستارت يخرجلي شاشة مليئه بالألوان خضراء و زرقاء (ولا أستطيع الإنتقال إلى مستوى أخر لعمل اي تعديل)
عندما أزيل التعريف القديم و أنزل التعريف الجديد نفس النتيجه (ولا أستطيع الإنتقال إلى مستوى أخر لعمل اي تعديل)
عندما أنزل التعريفات بدون أن أزيل أي شئ يخرجلي شاشة سوداء

[alsadi]

عند تنزيل تعرفات nvidia ال kmod و akmod
يجب أن تظهر في الأمر

lsmod | grep -i nvidia

إن لم تظهر اكتب بصلاحيات الجذر

modprobe nvidia

ربما تحصل على السبب

سؤال هو ما هو إصدار التعريف المناسب وما هي مخرجات lspci

وهل لهذا علاقة ؟

SOLVED Fedora 12 Problems installing Nvidia driver - nV News Forums

[محمد نجم]

صبري اشتري دماغك ونزل التعريف من موقع نفيديا رأساً!
ودعك من صداع المستودعات

[alsadi]

صبري اشتري دماغك ونزل التعريف من موقع نفيديا رأساً!

ذاك يسبب مشاكل أكثر مما يحلها

مشلكة صبري ليست في سوء التحزم مشكلته أن التعريف غير موجود أصلا أو لعله يرفض العمل عند modprobe

بانتظار أخبار عن modprobe nvidia

[KING SABRI]

اكتب إليكم من اللاب توب الأن

عند تنزيل تعرفات nvidia ال kmod و akmod
يجب أن تظهر في الأمر

إن لم تظهر اكتب بصلاحيات الجذر

ربما تحصل على السبب

سؤال هو ما هو إصدار التعريف المناسب وما هي مخرجات lspci

وهل لهذا علاقة ؟

SOLVED Fedora 12 Problems installing Nvidia driver - nV News Forums

اتبعت الرابط اللذي وضعته و وصل إلى شاشة الدخول و المستخدم و كلمة المرور و كلما أدخلت المستتخدم و كلمة المرور تصبح شاشه سوادء ثم تعود بسرعه إلى نفس شاشة السؤال عن المستخدم و كلمة المرور
في الرابط طلب إضافه كلمة معينه إلى ملف الإقلاع كانت النتيجه ما ذكرت لك. عندما حذفت الكلمة ظهرت المشكلة القديمة شاشه مليئة بالألوان لا أستطيع بسببها الدخول لأي مستوى أخر

ذاك يسبب مشاكل أكثر مما يحلها

مشلكة صبري ليست في سوء التحزم مشكلته أن التعريف غير موجود أصلا أو لعله يرفض العمل عند modprobe

بانتظار أخبار عن modprobe nvidia

بعد التثبيت و كل شئ نفذت الأمر السابق
المخرجات :

FATAL: Module nvidia not found.

بالنسبة لمخرجات للأمر lspci

compatible controller: nVidia corporation GeForce 8600 GT rev a1

الأن أحاول انا أفتح الموقع اللذي وضعته يا مؤيد و ما يفتح معي (أريد أن أضع التعديلات اللتي أشار إليه في ملف الإقلاع و بصراحة لا أعرف ما فائدتها لكنها فرقت في النتائج) ,, قسما بالله هم يضحك و هم يبكي

أنا عاذر أي واحد يقولي إني مو فاهم كلامي لكن و الله احاول صياغة الكلام أكثر من مره و كل مره تطلع جملة غير إللي قبلها

[sameh 1]

اخى العزيز KING SABRI مررت بنفس المشكلة مع كارت شاشة انفيديا9200 وحاولت تعريفه بشتى الطرق مرارا دون جدوى حيث فشلت جميعها ويبدو ان هناك تعارضا بين التعريف مفتوح المصدر وتعريف انفيديا المغلق كما ان التعريف المغلق لانفيديا ما زال تحت الاختبار فى مستودعات rpm fusion وبعد يومين من المحاولة عدت الى اعجوبة 3 حتى تحل المشكلة بامر الله

[alsadi]

FATAL: Module nvidia not found.

أخي صبري دقق معي يقول لك أن الحزمة غير مثبتة لنواتك جرب هذه الأوامر

uname -r
rpm -qa '*kmod-nvidia*'
find /lib/modules/ -iname '*nvidia*.ko'
find /lib/modules/$(uname -r) -iname '*nvidia*.ko' 

مثلا هذه المخرجات من عندي

[alsadi@pc1 ojuba]$ find /lib/modules/$(uname -r) -iname '*nvidia*.ko'
/lib/modules/2.6.30.9-96.fc11.i686.PAE/extra/nvidia/nvidia.ko
/lib/modules/2.6.30.9-96.fc11.i686.PAE/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.30.9-96.fc11.i686.PAE/kernel/drivers/video/nvidia/nvidiafb.ko 

[sameh 1]

جرب ما يلى اولا Add this to the end of the kernel line in /etc/grub.conf -> “nouveau.modeset=0 vga=0×318″
ثانيا نصب التعريف بالامر التالى
su
rpm -Uvh http://download1.rpmfusion.org/free/...ble.noarch.rpm http://download1.rpmfusion.org/nonfr...ble.noarch.rpm
yum --enablerepo=rp*g install kmod-nvidia.$(uname -m) xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64
reboot

[a|Maestro]

انا متابع للموضوع ولكل ردودة ..

اتمني يا صبري تبلغنا بكل شئ صاير معاك لانه مشكلتك بالضبط مثل مشكلتي و في كم شخص بيعانوا من نفس المشكلة

بنتظار عودتك و جديدك يا ملك

[باجيو ثرمداء]

السلام عليكم مشكلتك ياخوي KING SABRI حليتها بعد ايقاف selinux بعد الدخول

من المستوى الثالث غيرت /boot/grub/menu.lst

كان

kernel /boot/vmlinuz-2.6.31.5-127.fc12.i686.PAE ro root=UUID=afafe6e4-a7a1-456e-94b9-402891e7d3ac noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet

وغيرته الى

kernel /boot/vmlinuz-2.6.31.5-127.fc12.i686.PAE ro root=UUID=afafe6e4-a7a1-456e-94b9-402891e7d3ac noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet selinux=0

اضفت كلمة selinux=0

واعد التشغيل وتنحل المشكلة انشاء الله

تعطيل selinux اقتباس من

الاخ moceap


وهذا الموضوع الاصلي ورابطه


http://www.linuxac.org/forum/linuxac43/thread31564.html

[a|Maestro]

اتمني مشاهدة الموضوع التالي:
F12,F11 & F10 Nvidia driver guides - FedoraForum.org

[DoN-CaRLoS]

اخي صبري هذا المشكلة معي ايضا ياتيني شاشة سوداء ومكتوب فيها كلام والله ما اتذكرها وعملت فورمات للجهاز ونصبت من جديد وعملت بعض التعريفات ونفش المشكلة وخرب اعصابي فيدورا ورجعت الى اوبنتو 9.10

[DoN-CaRLoS]

اتمني مشاهدة الموضوع التالي:
f12,f11 & f10 nvidia driver guides - fedoraforum.org

عملت كل اللي في الموضوع من قبل ولم ينجح معي يعطيني شاشة سوداء

[a|Maestro]

وانا عندي نفس مشكلة صبري
و توقفت عن حل المشكلة لحين انتهاء الاستاذ صبري من حل مشكلته و يعطينا الحل النهائي للمشكلة
لكن له اسبوع كامل ولا رد ع الموضوع او تابعة شكلة كرة فيدورا و الكمبيوتر و راح يلعب بلايستشين ^_^