إعـــــــلان

تقليص
لا يوجد إعلان حتى الآن.

اختيار الاقلاع

تقليص
X
 
  • تصفية - فلترة
  • الوقت
  • عرض
إلغاء تحديد الكل
مشاركات جديدة

  • اختيار الاقلاع

    السلام عليكم ورحمة الله وبركاته

    اخواني من خلال تثبيتي لجواثا اشوف ملفات الوندوز واذا سويت ريستارات يدخلني لجواثا على طول ابي عند تشغيل الجهاز يطلع لي اختيارين جواثا والوندوز علما باني دخلت على البوت غراب في جواثا ودخلت ملف مينو ليست بس ماعرفت اعدل عليه في اي سطر الله لايهينكم وهذا ملف مينو لست
    كود:
    u.lst - See: grub(8), info grub, update-grub(8)
    #            grub-install(8), grub-floppy(8),
    #            grub-md5-crypt, /usr/share/doc/grub
    #            and /usr/share/doc/grub-doc/.
    
    ## default num
    # Set the default entry to the entry number NUM. Numbering starts from 0, and
    # the entry number 0 is the default if the command is not used.
    default		0
    
    ## timeout sec
    # Set a timeout, in SEC seconds, before automatically booting the default entry
    # (normally the first entry defined).
    timeout		5
    
    # Pretty colours
    color cyan/blue white/blue
    gfxmenu (hd0,4)/boot/message
    
    ## password ['--md5'] passwd
    # If used in the first section of a menu file, disable all interactive editing
    # control (menu entry editor and command-line)  and entries protected by the
    # command 'lock'
    # e.g. password topsecret
    #      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
    # password topsecret
    
    #
    # examples
    #
    # title		Windows 95/98/NT/2000
    # root		(hd0,0)
    # makeactive
    # chainloader	+1
    #
    # title		Linux
    # root		(hd0,1)
    # kernel	/vmlinuz root=/dev/hda2 ro
    #
    
    #
    # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
    
    ### BEGIN AUTOMAGIC KERNELS LIST
    ## lines between the AUTOMAGIC KERNELS LIST markers will be modified
    ## by the debian update-grub script except for the default options below
    
    ## DO NOT UNCOMMENT THEM, Just edit them to your needs
    
    ## ## Start Default Options ##
    ## default kernel options
    ## default kernel options for automagic boot options
    ## If you want special options for specific kernels use kopt_x_y_z
    ## where x.y.z is kernel version. Minor versions can be omitted.
    ## e.g. kopt=root=/dev/hda1 ro
    ##      kopt_2_6_8=root=/dev/hdc1 ro
    ##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
    # kopt=root=/dev/hda5 ro quiet vga=791
    
    ## default grub root device
    ## e.g. groot=(hd0,0)
    # groot=(hd0,4)
    
    ## should update-grub create alternative automagic boot options
    ## e.g. alternative=true
    ##      alternative=false
    # alternative=false
    
    ## should update-grub lock alternative automagic boot options
    ## e.g. lockalternative=true
    ##      lockalternative=false
    # lockalternative=false
    
    ## additional options to use with the default boot option, but not with the
    ## alternatives
    ## e.g. defoptions=vga=791 resume=/dev/hda5
    # defoptions=splash
    
    ## should update-grub lock old automagic boot options
    ## e.g. lockold=false
    ##      lockold=true
    # lockold=false
    
    ## Xen hypervisor options to use with the default Xen boot option
    # xenhopt=
    
    ## Xen Linux kernel options to use with the default Xen boot option
    # xenkopt=console=tty0
    
    ## altoption boot targets option
    ## multiple altoptions lines are allowed
    ## e.g. altoptions=(extra menu suffix) extra boot options
    ##      altoptions=(single-user) single
    # altoptions=(single-user mode) single
    
    ## controls how many kernels should be put into the menu.lst
    ## only counts the first occurence of a kernel, not the
    ## alternative kernel options
    ## e.g. howmany=all
    ##      howmany=7
    # howmany=all
    
    ## should update-grub create memtest86 boot option
    ## e.g. memtest86=true
    ##      memtest86=false
    # memtest86=true
    
    ## should update-grub adjust the value of the default booted system
    ## can be true or false
    # updatedefaultentry=false
    
    ## ## End Default Options ##
    
    title		Joatha test 7, kernel 2.6.19.1-smp, Default
    root		(hd0,4)
    kernel		/boot/vmlinuz root=/dev/hda5 ro quiet vga=791 splash
    
    title		Joatha test 7, kernel 2.6.19.1-joatha-smp-7
    root		(hd0,4)
    kernel		/boot/vmlinuz-2.6.19.1-joatha-smp-7 root=/dev/hda5 ro quiet vga=791 splash
    
    title		Joatha test 7, kernel memtest86+
    root		(hd0,4)
    kernel		/boot/memtest86+.bin
    
    ### END DEBIAN AUTOMAGIC KERNELS LIST
    title Windows 95/98/ME (hda1)
    root (hd0,0)
    makeactive
    chainloader +1

  • #2
    شوف هذا الرابط يمكن يفيدك

    تعليق


    • #3
      نفس المشكله اخوي المفضل

      تعليق


      • #4
        بسم الله الرحمن الرحيم
        ملفات النظام أو البرامج بشكل عام تكون فيها الأسطر التي تبدأ بعلامة # هي أوامر غير منشطة أو تعليقات أو شروح لكيفية استخدام الملف ، وبهذا تكون الأسطر التي يمكن التعديل فيها قليلة ، وإذا أردت التعديل في ملف إعدادات محمل الإقلاع :
        الأمر default يحدد لك رقم الاختيار الافتراضي من قائمة أنظمة التشغيل الذي سيتم الإقلاع منه إذا لم تحدد اختيار آخر .
        والأمر timeout يحدد لك وقت العد التنازلي الذي سيقوم بعده محمل الإقلاع بالإقلاع من الاختيار الافتراضي ، والأوامر الأخرى مثل color هي أوامر تحدد المظهر العام لمحمل الإقلاع .
        أما الأوامر الخاصة بقائمة الأنظمة التي يتم الاختيار بينها ، فهي لديك في آخر الملف ، وتكون على شكل فقرات يبدأ السطر الأول منها بالأمر title وبجانبه يوضع العنوان الذي سيظهر في القائمة .
        والأمر root وهو يحدد الفهرس الرئيسي للنظام أو محرك الأقراص المثبت عليه .
        والأمر kernel يحدد موقع صورة النواة الخاصة بنظام لينوكس ومعها توضع الخيارات التي يتم تمريرها للنواة .
        وأعتقد أنه طبقا للملف الذي أدرجته فيجب أن يظهر محمل الإقلاع grub وبه قائمة اختيارات هي :
        Joatha test 7, kernel 2.6.19.1-smp, Default
        Joatha test 7, kernel 2.6.19.1-joatha-smp-7
        Joatha test 7, kernel memtest86+
        Windows 95/98/ME

        ويكون نظام windows هو آخر نظام في القائمة وتستطيع التنقل بين الاختيارات باستخدام مفتاحي الأسهم لأعلى ولأسفل من لوحة المفاتيح ، ولإقلاع نظام معين تضغط على مفتاح الإدخال Enter .
        ربنا اغفر لنا ولإخواننا الذين سبقونا بالإيمان ولا تجعل في قلوبنا غلا للذين ءامنوا ربنا إنك رؤوف رحيم

        مدونتي

        تعليق


        • #5
          اشكرك اخوي abdelrahman_em ولكن ماهي الطريقه وكيف الله لايهينك

          تعليق


          • #6
            قم باعادة تركيب البوت لودر

            grub-install

            واذا استمرت المشكلة ، ارفق لنا محتويات المنيو لست الجديدة ، وسنقوم بايجاد حل باذن الله

            تعليق


            • #7
              اشكرك اخوي عبدالعزيز ولكن كيف اقوم باعادة تركيب البوت لودر

              تعليق


              • #8
                بوضع هذا الامر في شاشة الامر

                grub-install

                تعليق

                يعمل...
                X