كنت قد واجهت مشكلة قبل فترة في تنصيب توزيعة لينيكس في جهاز لا يدعم الــDVD وكذلك لايمكن الإقلاع فيه من الــUSB flash ، بالإضافة إلى أنني لم أتحصل على هاردسك خارجي ( المصائب لا تأتي فرادى
) .
وقد أشرت إلى ذلك في موضوعي السابق http://www.linuxac.org/forum/showthread.php?45514-الإسطوانة-لا-تقلع-بعد-ترتيب-الإقلاع-...&highlight==
ما احمله لكم الآن هو أنني تمكنت من الإقلاع من الــ USB flash من الجهاز المذكور أعلاه وتمكنت من تنصيب ubuntu 10.10 عليه .
الطريقة كانت سهلة ولكنها إحتاجت لبحث طويل خصوصا عندما صادف ذلك أيام العيد .
كل ما في الموضوع هو أنني أضفت خيار آخر في محمل الإقلاع بالإستعانة بالصديق windows ، كذلك يمكن ذلك عن طريق الإستعانة بالـــ linux .
قم بالدخول إلى الموقع التالي
www.plop.at/en/bootmanagerdl.html
اتبع الصورة التالية

Uploaded with ImageShack.us
بعد ما أنزلنا الملفين إتبعت الطريقة الموجودة في ملف المساعدة readme
بالنسبة لي كنت مستخدم ويندوز في المساعدة .
قمت بإنشاء ملف جديد في المسار
وأسميته plop .
ومن ثم نقلت إليه الملفين plpinstc.com و plpgenbtldr.exe الموجودان في الملف المضغوط ذو الإسم ( plpgenbtldr-0.8 ) .
ومن ثم أعدنا تسمية الملف ( plpinstc.com ) إلى ( plpbt.bin ) .
فتحت شاشة command shell . ومن ثم كمستخدم رئيسي ( administrator ) قمت بتنفيذ بقية الإجراءات وهي كالتالي :
طبقتن الأمر
حتى أصبح داخل الملف plop الموجود في المسار c ، أي انني في المسار التالي c:\plop

قمت بتنفيذ الملف (plpgenbtldr) وظهرت رسالة في شاشة command shell تفيد بنجاح العملية .

Uploaded with ImageShack.us
وكان الناتج ظهور ملف جديد في المسار السابق هو ( plpbtldr.bin ) .
ومن ثم فتحت ملف ( boot.ini ) الموجود في المسار ( c ) الأساسي . ( للتنبيه بأن الملف أصلا مخفي )
ويمكن استعائه مباشرة بكتابة
في مربع العنوان في windows explorer . وسيتم فتح الملف مباشرة .
بعد ذلك أضفنا السطر التالي في آخر الملف النصي ( boot.ini ) .
ومن ثم حفظنا الملف في سطح المكتب ، لأنه لا يمكن حفظه مباشرة .
بعد ذلك عملنا نسخ للملف إلى المسار ( c:/ ) وظهرت رسالة تبديل الملف القديم بالجديد وضغطنا على استبدال الملف .
الآن فقط يمكن إعادة التشغيل وسيظهر لنا سطر جديد عند الإقلاع ( لا ننسى اننا قد قمنا بتجهيز أي توزيع على فلاش واننا قد قمنا بتركيبه في الجهاز )

Uploaded with ImageShack.us
قمنا باختيار ( Install Plop Boot Manager ).

Uploaded with ImageShack.us
ومن ثم اخترنا الإقلاع من الــ ( usb ) كما في الصورة

وقد أشرت إلى ذلك في موضوعي السابق http://www.linuxac.org/forum/showthread.php?45514-الإسطوانة-لا-تقلع-بعد-ترتيب-الإقلاع-...&highlight==
ما احمله لكم الآن هو أنني تمكنت من الإقلاع من الــ USB flash من الجهاز المذكور أعلاه وتمكنت من تنصيب ubuntu 10.10 عليه .
الطريقة كانت سهلة ولكنها إحتاجت لبحث طويل خصوصا عندما صادف ذلك أيام العيد .
كل ما في الموضوع هو أنني أضفت خيار آخر في محمل الإقلاع بالإستعانة بالصديق windows ، كذلك يمكن ذلك عن طريق الإستعانة بالـــ linux .
قم بالدخول إلى الموقع التالي
www.plop.at/en/bootmanagerdl.html
اتبع الصورة التالية

Uploaded with ImageShack.us
بعد ما أنزلنا الملفين إتبعت الطريقة الموجودة في ملف المساعدة readme
Harddisk install using the Windows boot menu (2K, XP, VISTA, Win7)
__________________________________________________ ________________
Download the file [64]plpgenbtldr-0.8.zip and extract it.
* Create a directory like c:\plop. You can use any directory you
want.
* Copy plpinstc.com and plpgenbtldr.exe to your c:\plop directory.
* Rename plpinstc.com to plpbt.bin.
* As administrator/with administrator rights open a command shell.
Hint VISTA/Win7: Use right click at the command shell menu entry
and choose "Run as administrator"
change to c:\plop with cd \plop
* Then run plpgenbtldr
This program searches for the file plpbt.bin in the current
directory.
plpgenbtldr generates the file plpbtldr.bin.
* Adding to the boot menu. Windows 2K and XP is different to Windows
VISTA and Windows 7
+ Windows 2K, XP
add the line below to your c:\boot.ini
c:\plop\plpbtldr.bin="Install Plop Boot Manager"
+ Windows VISTA
open notepad as administrator and create a file c:\boot.ini
add those lines
[boot loader]
[operating systems]
c:\plop\plpbtldr.bin="Install Plop Boot Manager"
Thanks to tri_zet for this info
+ Windows 7
Open the command prompt as administrator.
Use bcdedit to create the boot menu entry.
bcdedit /create /d "Install Plop Boot Manager" /application
bootsector
This prints a long number with { }.
This long number is called "id".
Replace the "id" with your number in the following commands.
bcdedit /set {id} device partition=C:
bcdedit /set {id} path \plop\plpbtldr.bin
bcdedit /displayorder {id} /addlast
Additional links: [65]Forum entry, [66]Gord's blog
Now you should be able to install the Plop Boot Manager from your
Windows boot menu to your harddisk.
Problems/Errors
plpbt.bin must not be fragmeted! Use [67]Wincontig or [68]contig to
take care, that plpbt.bin is not fragmented.
Harddisk install using Syslinux, Isolinux, Pxelinux (Network)
__________________________________________________ ________________
Download the current boot manager [69]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc in the install directory.
Add plpinstc.com to the config file
* for Syslinux it's syslinux.cfg
* for Isolinux it's isolinux.cfg
* for Extlinux it's extlinux.conf
* for Pxelinux it's pxelinux.cfg/default more netboot infos: [70]for
Linux click here, [71]for Windows click here
Add the following lines to the config file
label plpinst
linux plpinstc.com
Copy plpinstc to the same directory where the config file is.
You start the install program when you enter plpinst at the Syslinux
command prompt.
Harddisk install using LILO
__________________________________________________ ________________
Download the current boot manager [72]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc.com in the install directory.
Copy plpinstc.com to /boot.
Add to your /etc/lilo.conf the following
image=/boot/plpinstc.com
label=plop-install
Run lilo to update lilo.
Harddisk install using GRUB / grub4dos
__________________________________________________ ________________
Download the current boot manager [73]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc.com in the install directory.
Copy plpinstc.com to /boot.
You have to choose the correct root settings in menu.lst for your
system.
The following is an example
title Plop Boot Manager Install
root (hd0,0)
kernel /boot/plpinstc.com
When you reboot, you should be able to choose the install program from
your grub menu.
__________________________________________________ ________________
Download the file [64]plpgenbtldr-0.8.zip and extract it.
* Create a directory like c:\plop. You can use any directory you
want.
* Copy plpinstc.com and plpgenbtldr.exe to your c:\plop directory.
* Rename plpinstc.com to plpbt.bin.
* As administrator/with administrator rights open a command shell.
Hint VISTA/Win7: Use right click at the command shell menu entry
and choose "Run as administrator"
change to c:\plop with cd \plop
* Then run plpgenbtldr
This program searches for the file plpbt.bin in the current
directory.
plpgenbtldr generates the file plpbtldr.bin.
* Adding to the boot menu. Windows 2K and XP is different to Windows
VISTA and Windows 7
+ Windows 2K, XP
add the line below to your c:\boot.ini
c:\plop\plpbtldr.bin="Install Plop Boot Manager"
+ Windows VISTA
open notepad as administrator and create a file c:\boot.ini
add those lines
[boot loader]
[operating systems]
c:\plop\plpbtldr.bin="Install Plop Boot Manager"
Thanks to tri_zet for this info
+ Windows 7
Open the command prompt as administrator.
Use bcdedit to create the boot menu entry.
bcdedit /create /d "Install Plop Boot Manager" /application
bootsector
This prints a long number with { }.
This long number is called "id".
Replace the "id" with your number in the following commands.
bcdedit /set {id} device partition=C:
bcdedit /set {id} path \plop\plpbtldr.bin
bcdedit /displayorder {id} /addlast
Additional links: [65]Forum entry, [66]Gord's blog
Now you should be able to install the Plop Boot Manager from your
Windows boot menu to your harddisk.
Problems/Errors
plpbt.bin must not be fragmeted! Use [67]Wincontig or [68]contig to
take care, that plpbt.bin is not fragmented.
Harddisk install using Syslinux, Isolinux, Pxelinux (Network)
__________________________________________________ ________________
Download the current boot manager [69]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc in the install directory.
Add plpinstc.com to the config file
* for Syslinux it's syslinux.cfg
* for Isolinux it's isolinux.cfg
* for Extlinux it's extlinux.conf
* for Pxelinux it's pxelinux.cfg/default more netboot infos: [70]for
Linux click here, [71]for Windows click here
Add the following lines to the config file
label plpinst
linux plpinstc.com
Copy plpinstc to the same directory where the config file is.
You start the install program when you enter plpinst at the Syslinux
command prompt.
Harddisk install using LILO
__________________________________________________ ________________
Download the current boot manager [72]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc.com in the install directory.
Copy plpinstc.com to /boot.
Add to your /etc/lilo.conf the following
image=/boot/plpinstc.com
label=plop-install
Run lilo to update lilo.
Harddisk install using GRUB / grub4dos
__________________________________________________ ________________
Download the current boot manager [73]plpbt-5.0.11.zip. Extract it to
get the boot manager install program. You find the install program
plpinstc.com in the install directory.
Copy plpinstc.com to /boot.
You have to choose the correct root settings in menu.lst for your
system.
The following is an example
title Plop Boot Manager Install
root (hd0,0)
kernel /boot/plpinstc.com
When you reboot, you should be able to choose the install program from
your grub menu.
قمت بإنشاء ملف جديد في المسار
c:/
ومن ثم نقلت إليه الملفين plpinstc.com و plpgenbtldr.exe الموجودان في الملف المضغوط ذو الإسم ( plpgenbtldr-0.8 ) .
ومن ثم أعدنا تسمية الملف ( plpinstc.com ) إلى ( plpbt.bin ) .
فتحت شاشة command shell . ومن ثم كمستخدم رئيسي ( administrator ) قمت بتنفيذ بقية الإجراءات وهي كالتالي :
طبقتن الأمر
cd \plop

قمت بتنفيذ الملف (plpgenbtldr) وظهرت رسالة في شاشة command shell تفيد بنجاح العملية .

Uploaded with ImageShack.us
وكان الناتج ظهور ملف جديد في المسار السابق هو ( plpbtldr.bin ) .
ومن ثم فتحت ملف ( boot.ini ) الموجود في المسار ( c ) الأساسي . ( للتنبيه بأن الملف أصلا مخفي )
ويمكن استعائه مباشرة بكتابة
c:/boot.ini
بعد ذلك أضفنا السطر التالي في آخر الملف النصي ( boot.ini ) .
c:\plop\plpbtldr.bin="Install Plop Boot Manager"
بعد ذلك عملنا نسخ للملف إلى المسار ( c:/ ) وظهرت رسالة تبديل الملف القديم بالجديد وضغطنا على استبدال الملف .
الآن فقط يمكن إعادة التشغيل وسيظهر لنا سطر جديد عند الإقلاع ( لا ننسى اننا قد قمنا بتجهيز أي توزيع على فلاش واننا قد قمنا بتركيبه في الجهاز )

Uploaded with ImageShack.us
قمنا باختيار ( Install Plop Boot Manager ).

Uploaded with ImageShack.us
ومن ثم اخترنا الإقلاع من الــ ( usb ) كما في الصورة
تعليق