إعـــــــلان

تقليص
لا يوجد إعلان حتى الآن.

تعريف Ati عى مندريفا ٢٠٠٨ بالتفصيل

تقليص
X
 
  • تصفية - فلترة
  • الوقت
  • عرض
إلغاء تحديد الكل
مشاركات جديدة

  • سلفر
    رد
    المشاركة الأصلية بواسطة BAD3R مشاهدة المشاركة
    وعليكم السلام

    لا عاد تنسى الايقونه ياسلفر علشان ما اقفل .. الموضوع ..


    دمت بخير ...

    bAD3R
    آسف وشكراً ﻷنك لم تقفل الموضوع .

    اترك تعليق:


  • Br4v3-H34r7
    رد
    شكرا لك أخوي على الشرح
    والله يعطيك العافية

    -------------
    bAD3R حاسك شرطي مرور خخخخخخخخخخ

    اترك تعليق:


  • Mohammed AL Jeaid
    رد
    وعليكم السلام

    لا عاد تنسى الايقونه ياسلفر علشان ما اقفل .. الموضوع ..


    دمت بخير ...

    bAD3R

    اترك تعليق:


  • تعريف Ati عى مندريفا ٢٠٠٨ بالتفصيل

    وجدت موضوع ممتاز ومفصل يشرح طريقة تعريف كروت ati على منتدى مندريفا واحببت أن انقل اهم النقاط في الموضوع :
    كود:
    Installing the new ATI drivers on 2008 is not an easy process compared
     to 2007/1.. On a clean install of 2008 I had to go with the default 8.40 drivers
     and configure the card through the MCC then open the software manager remove
     all the related *latest packages for the ones listed below enable the main
     contrib and non-free backports finally reboot to failsafe
    type init 3 log in at the prompt su to root and do the following.
    1.urpme x11-driver-video-fglrx 8.40.4-7mdv2008.0
    2. urpme dkms-fglrx 8.40.4-7mdv2008.0
    3.urpme fglrx-control-center 8.40.4-7mdv2008.0
    4. fglrx-kernel-2.622.9-desktop-1mdv
    then
    1.urpmi dkms-fglrx-hd2000 8.42.3-4ndv2008.0
    2.urpmi fglrx-hd2000-control-center 8.40.4-7mdv2008.0
    3. urpmi x11-driver-video-fglrx-hd2000 8.40.4-7mdv2008.0
    
    reboot..
    
    I had working 3-D then but I also had the watermark issue so I had to
    download
     the ati-driver-installer-8.42.3-x86.x86_64.run from ATI and from a konsole type
     chmod +x ati-driver-installer-8.42.3-x86.x86_64.run then ./ati-driver-installer-8.42.3-x86.x86_64.run --extract
    then from the run command did kdesu konqueror navigate to the extracted fglrx-install folder browse
     to the /common/etc/ati sub folder
    and copy the contents to /etc/ati... I think I only needed
     the
    logo_mask.xbm.example and the signature files but I was aggravated
    by then and copied the entire contents and rebooted and the watermark was gone.
    Then I editied the xorg.conf to enable AIGLX and composite.
    
    Under Section "ServerLayout"
    Option "AIGLX" "on"
    
    Under Section "ServerFlags"
    Option "AIGLX" "true"
    
    Created
    
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    
    Reboot
    
    Now I am able to run compiz-fusion in native mode.
    No other method I had used previously to install the drivers would work and always resulted in mesa for 3-D
    
    AW posted this thread yesterday http://forum.mandriva.com/viewtopic.php?t=75822
    That should make it much easier... however... I don't understand why you need to install the old drivers and overlay the new ones...I never liked doing that in windows either...
    
    Also I had to edit the /boot/grub/menu.lst and change
    splash=silent to splash=verbose otherwise x would hang when logging out/switching users. No idea if this has been fixed with AW's new method of installing the drivers.
    
    *Edit*
    When I did the urpme listed 1st a package got removed as a dependency I couldn't remember what it was but it was related to the 8.40 drivers.. I think it was the dkms package but wasn't sure so I listed it anyways.
    وفي حالة رغبتك اﻻستزادة يمكن مراجعة الموضوع اﻻصلي على رابط مندريفا :
    http://forum.mandriva.com/viewtopic.php?t=75533
يعمل...
X